Byadmin

Aug 18, 2020

Top 10: Best Self Leveling Laser Level Options Review

A self leveling laser level could provide you with one of two things, good construction work and a sloppy end product. The most accurate laser level would then obviously be the better selection if you require precise construction accuracy. Depending on what your building requirements are, you may want to purchase either a small laser level or a more industrious outdoor laser level.

No DIY project, big or small should be taken on without having the best self leveling laser you can find. Nothing is more irritating than when measurements are inaccurate and you are left admiring your very skew project. So although you may be tempted to cut corners and go for the cheapest laser level, you might want to shop around a bit and invest long term in a professional level.

 

10 Best Laser Levels for Homeowners 2020

  1. DEWALT Self-Leveling Line Laser

DEWALT Self Leveling Laser Level
DEWALT (DW088K) Line Laser, Self-Leveling, Cross Line

You can now improve productivity and consistency on the job site with the DEWALT DW088K self-leveling cross-line laser. It is perfect for professionals tasked with residential and commercial applications such as installing floor and wall tile or mapping wall layout.

The featured laser projects bright crossing horizontal and vertical lines with accuracy within 1/8 of an inch at 30 feet. Its full-time pulse mode enables for use with a detector, maintaining full brightness for visibility while extending the working range of the laser to 165 feet.

The DW088K has a durable design with over-molded housing and IP54 water/debris resistance. Its built-in magnetic pivoting base and 1/4-inch thread make for effortless mounting on metal surfaces.

This line laser from Dewalt also features individual buttons on the side control panel that operate all three beams, and it comes with a hard-sided kit box for storage and transport.

Pros & Cons

Pros
  • Self-leveling cross lines
  • 165-foot range with detector
  • 1/8-inch accuracy
  • Integrated magnetic pivoting base
Cons
  • Laser may not work well in daylight

 

  1. Qooltek Multipurpose Laser Level Laser Line

Qooltek Multipurpose Laser Level Laser Line
Qooltek Multipurpose Laser Level Laser Line

This Multipurpose Line Level combines a fine-tuned tape measure, a triple-positioned leveling bubble and a NEW laser level to deliver maximum results. Also note the Laser Ranging Error, that is given as “+/-2mm at 10m and 25m”;if the laser is the vertical level or the horizontal level, you shouldn’t adjust the beam.

It is designed for any situation where a straight line or accurate measurements are required, such as measuring locations on a wall, space between hangers, level the nails. Regardless of the situation, it’s completely plug & play but unfortunately the laser does face outdoors or in direct sunlight.

It also comes loaded with an 8-foot measure that features imperial and metric linear measures, with graduations down to 1/32″ and 1mm.

Pros & Cons

Pros
  • Laser light has an on/off power switch
  • Triple-positioned leveling bubble
  • Fine-tuned tape measure
  • Tape measure is an 8-foot measure
Cons
  • Fades in sunlight or outdoor use

 

  1. Tavool 50 Ft. Self Leveling Laser Level

Tavool 50 Ft. Self Leveling Laser Level
Tavool 50 Ft. Self Leveling Laser Level

This is the Tavool T series laser level with 3-beam vertical, horizontal and cross line laser that takes advanced technology to offer maximum line laser visibility up to 50ft. Whether it’s a strong sunny day or a dark night, its red laser line allows for a high visibility to give your home renovations or other DIY projects the most accurate results.

This level laser tool could self level when located on an inclined surface within 4 °; if the surface inclines over 4 °, the laser will flash to indicate out-of-level condition to remind you to adjust the location of laser leveler tool, which is extremely effortless to utilize and save your much precious time.

The laser level line features two switching models which is lock and unlock. Each of them has three measurement modes, consisting of vertical laser, horizontal laser line and cross laser line. The switchable horizontal and vertical red beam laser tool could lock the vertical, horizontal and angle position of the measurement target swiftly.

Pros & Cons

Pros
  • Easy to operate and portable
  • Multi-function operation modes
  • Switchable horizontal and vertical red beam laser
  • Suitable for different usage modes
Cons
  • Laser emitted may be too thick to get perfect level line

 

  1. AikTryee Multipurpose Laser Level Kit

AikTryee Multipurpose Laser Level Kit
Multipurpose Laser Level Kit

This laser tool lever is designed for any situation where accurate measurements are needed, such as hang shelves, cabinets, tiles and picture frames with precision, so all jobs that require a straight line or accurate measurements.

The AikTryee laser leveler tool is created with one slider selection button in the front to make it effortless for everyone to use. It control the vertical laser line, horizontal laser line and cross laser line mode switching, suitable for a variation of usage modes, and precision is more accurate and stable.

This is a laser level tool with one Level (0°), one plumb (90°), and one 45° bubble for determining horizontal and vertical plane, to offer more accurate results.

The laser level comes loaded with an 8-foot measure that has imperial and metric linear measures, with graduations down to 1/32″ and 1mm.

Pros & Cons

Pros
  • One slider selection button
  • Multi-function laser level
  • Accuracy is more accurate and stable
  • Suitable for different usage modes
Cons
  • Complaints of level being unbalanced

 

  1. Bosch Self-Leveling Cross-Line Red-Beam Laser Level

Bosch Self-Leveling Cross-Line Red-Beam Laser Level
Bosch Self-Leveling Cross-Line Red-Beam Laser Level

The Bosch GLL 30 self leveling cross line laser Projects two lines, making a cross line projection, for a wide variation of level and align uses. This versatility makes it more valuable than a general line laser. With top notch accuracy and one switch operation, the user’s leveling and alignment tasks are done swiftly and properly.

The laser lines are visible up to 30 ft. and the smart pendulum system self levels and indicates out of level condition to help ensure an accurate layout. The pendulum system also locks when switched off, to make sure of secure tool transportation.

The included mm 2 flexible mounting device supplies micro fine height adjustment and it enables the Bosch line laser to be clamped on virtually any surface from 1/2 inch to 2 1/4 inch thick, for level lines at any height.

Pros & Cons

Pros
  • Allows laser to self level
  • Indicating out of level condition to help ensure accuracy
  • Laser’s thin lines are highly visible
  • Ergonomic, handy, pocket size design
Cons
  • Does not have manual mode

 

  1. BLACK+DECKER Laser Level

BLACK+DECKER Self Leveling Laser Level
BLACK+DECKER Laser Level

To make sure your project is level can be a chore, but not with the Laser Level with Mounting Accessories from Black and Decker. The BDL220S s 360 rotating wall attachment projects a laser line at any angle for rapid and simple leveling.

The laser level also features two bubble vials with backlights for increased visibility of bubbles. It is perfect for hanging pictures along a stairwell, hanging mirrors, installing curtain rods, and other domestic items.

Its 360-degree rotating wall attachment projects a laser line at any angle and two additional large backlit bubble vials are offered for maximum accuracy and visibility. Categorized as a class II laser, this laser level also comes backed by a 2-year limited warranty.

Pros & Cons

Pros
  • 360-degree rotating wall attachment
  • Two extra large backlit bubble vials
  • Projects a laser line at any angle
  • Can use the unit as a conventional level
Cons
  • Magnets may not be as strong
  • Nail on underside may be in the way

 

  1. Tacklife SC-L01-50 Feet Laser Level

Tacklife SC-L01-50 Feet Self Leveling Laser Level
Tacklife SC-L01-50 Feet Laser Level

You can press the top power button or open the pendulum lock to activate laser beam and it auto-levels when placed within 4 degrees of horizontal/vertical. If out of range, the laser beams will flash to alert; it is pendulum locked to start manual mode and you can lock lines for alignment to other angles.

The laser level can be mounted onto a tripod or affixed to most metal surface utilizing the included magnetic bracket. You can also turn the laser level around at 360 degree, project lines in any position or angle or adjust the height from the tripod.

Compact and lightweight for effortless gripping, but large enough to sit stably and it is fitted with a nylon zippered pouch that can prohibit dust for storage and protects the level and L base against impact/scratching.

Pros & Cons

Pros
  • Auto-levels when placed within 4 degrees
  • Emits and projects a laser cross line
  • Turn the laser level around at 360 degree
  • Equipped with a nylon zippered pouch
Cons
  • Cannot tilt it too far
  • Light may be fairly dim outdoors

 

  1. Huepar 902CG Self-Leveling 360-Degree Cross Line Laser Level with Pulse Mode

Huepar 902CG Self-Leveling 360-Degree Cross Line Laser Level with Pulse Mode
Huepar 902CG Self-Leveling 360-Degree Cross Line Laser Level with Pulse Mode

With its ultra bright 360-degree vertical and 360-degree horizontal green beams the 902CG Laser Level offers all-around leveling coverage with accuracy of ±1/9 Inch at 33 feet and a maximum working range of 130 feet, allowing you to work in different parts of a large room simultaneously.

This self leveling laser level features the latest LD blue-green laser unit; it is at least 2 times brighter than red lasers utilizing the same power source. The bright 360° laser lines enable the user to project a laser reference line around the room with accuracy to swiftly establish level.

One button operation makes it simple to project lines together or independently (cross line, vertical and 360-degree horizontal). With the smart pendulum system, the pendulum locks when the level is switched off and you can simply hold the top button 2 seconds to start manual mode, letting you project lines in any position or angle.

Pros & Cons

Pros
  • All-around leveling coverage
  • Latest LD blue-green laser unit
  • Pendulum locks when the level is switched off
  • TPR soft rubber for shock resistant
Cons
  • May not work too well outdoors

 

  1. Huepar Cross Self Leveling Laser Level with 2 Plumb Dots

Huepar Cross Line Laser Level with 2 Plumb Dots
Huepar Cross Self Leveling Laser Level with 2 Plumb Dots

Huepar 9211G self-Leveling laser level provides two points plus a cross-line for a two-in-one laser. This hybrid point and line laser tool integrates all the features of the Huepar line laser plus point-to-point plumb, offering contractors in the commercial and remodeling trades maximum versatility.

This laser level supplies cross-line accuracy of +/- 1/9 inch at 33 feet, up point accuracy of 1/13 inch at 33 feet and down point accuracy of 1/9 inch at 33 feet. They also adopt the latest LD blue-green laser unit as it is at much brighter than red lasers making use of the same power source.

The 9211G cross-line laser consists of the Smart Pendulum System, so you are able to self-level on an inclined surface within 4 degrees. If the surface inclines over 4 degrees, the laser will flash to let you know you are out-of-leveling parameters so you always are confident that you are within optimal leveling range. Secure transport lock safeguards pendulum when unit is switched off and the manual mode locks lines for utilization at any angle.

Pros & Cons

Pros
  • Offers two points plus a cross-line
  • The latest LD blue-green laser unit
  • Self-level on an inclined surface within 4 degrees
  • Secure transport lock protects pendulum
Cons
  • You cannot turn on the lasers independently
  • May run through batteries quickly

 

  1. RockSeed 50 Feet Cross Line Laser with Self-Leveling

RockSeed 50 Feet Cross Line Laser with Self-Leveling
RockSeed 50 Feet Cross Line Laser with Self-Leveling

The cross line laser with slide switch allows you to set 2 modes, self-leveling mode and manual mode. When operating in self-leveling mode, the range of leveling and compensation is 4°± 1°and the laser level will automatically level for horizontal/vertical/cross line; otherwise the laser will flash to indicate the out-of-level condition.

In manual mode, the self-leveling function is deactivated and the cross is locked to utilize the tool at any angle.

The powerful cross line laser effortlessly projects a red cross line at a wide angle of 110°to assist your leveling jobs, bright and clear. With high accuracy of ±1/8 of an inch at 30 Ft, the line laser enjoys lower energy consumption and longer battery lifespan, which is perfect for paving tiles, installing photo, door, window, or furniture carpentry, hanging wallpaper, etc.

Pros & Cons

Pros
  • Compact and lightweight for easy gripping
  • Slide switch enable you to set 2 modes
  • Lower energy consumption and longer battery lifespan
  • Durable and high quality shockproof enclosure
Cons
  • Laser cannot be tilted to project up or down from its elevation

 

Buyers Guide for Choosing the Best Self Leveling Laser Level for the Money

Whether you’re marking a line around a room for a chair rail, or laying out tiles in a room, a line laser is essential. With a clear, sharp line that extends 30 feet or more, it’s much swifter, effortless, and potentially more precise than a traditional spirit level. With a variety designed for different tasks, from simple spot devices to those that can project a whole three-dimensional frame, line lasers can be extremely job-specific.

 

So which line laser will be effective enough for you?

It depends on the tasks you have to perform, and Yourtoolboxneedsthis has compiled a complete guide to help you make the correct decision. It’s a combination of our own testing, the advice of trade experts, and the feedback of hundreds of customers and reviewers.

For those who would like to learn more about what makes line lasers work, and the differences between various models, keep reading our shopping guide.

A laser line is always fairly straight, but it doesn’t have to be parallel to the floor. They’re ideal to show a line when hanging pictures up stairs, for instance.

 

How line lasers work

Laser beams was initially known as some kind of sci-fi super-ray and it has ever since turned to an everyday part of our lives. They’re capable of optimal accuracy and – in the case of eye surgery – tremendous delicacy.

 

But what exactly is a laser beam?

The word LASER is defined as Light Amplification by the Stimulated Emission of Radiation. With consumer items like line lasers, the initial light is produced by nothing more complex than an LED – much like you find in a digital clock. That light is “stimulated” by an electrical current, maximizing the intensity. It is then concentrated into a dot or line, and also projected by prisms or mirrors.

A laser beam always travels in a straight line, but it’s not innately “level.

To level the line laser, some basic devices make use of a bubble, like on a traditional level. More advanced models have an internal pendulum and sensors, and are also self-leveling. They might also feature an audible warning if they’re out of level.

You should never confuse three beams with three modes. The first provides three individual beams; the second may only have one or two beams, with options for how you utilize them.

 

Choosing a line laser

To help you select the best line laser for your particular task we’re going to look at four areas that distinguish these tools:

  • Type
  • Modes
  • Accuracy and range
  • Additional features

Type of line laser

Although all line lasers produce a beam in the same way, there are a few different types. The main difference is the number of beams projected, but there are others, so let’s look at each in detail.

Single line or spot

These are the most typical type of laser level, projecting a single beam until it strikes a spot off in the distance (that’s why some people call them spot line lasers).

Initial leveling is usually done with a bulb or bubble, as with an ordinary spirit level. They’re generally cheap, and if you just need to line things up along a wall – coat hooks, or a picture rail, for example – they’re extremely adequate.

They’re usually small, so very portable, but low power means they have limited range.

Cross line lasers

These are arguably the most popular type of line laser because they provide perfect flexibility at a reasonable price. There are two kinds, those that produce two laser beams, and those that emit three.

Two beams – one horizontal, the other vertical – will provide you with a crossing point, at 90°, on your chosen surface. If there’s nothing in their way, those lines will continue, offering you one line all the way around the room horizontally, and another up the wall, across the ceiling, and down the other side. In practice, range typically restricts the actual coverage.

Three beam laser levels project a second vertical beam, at 90° to the first and this gives you lines on front, back and side walls, thus allowing you to work in three dimensions – or all walls of a space at once.

These line lasers are utilized for everything from drywall installation, to tiling (walls and floors), laying out electrical conduit and lighting, or even fitting suspended ceilings.

Rotary line lasers

Cross line lasers are especially good in household applications. However, for really large areas you require more range, and that’s what you get from a rotary laser.

As the name suggests, these lasers don’t have a fixed beam, but instead have one that’s consistently spinning through 360°. It does this rapidly enough that the spot it projects appears to be a continuous flat line. Many rotary lasers only create one beam, though some also produce a vertical “plumb” line.

While they could be utilized when installing a chair rail, or to ensure door heights were the same around a room, their price means they’re more typically utilized for commercial building projects. They can be extremely large, and are used for tasks such as building warehousing and creating parking lots, where their range can be used to best advantage.

 

Line laser modes

Modes can be confusing, because they usually sound the same as the number of laser beams emitted, but they are not.

For instance, you may see a laser level with three modes: horizontal, vertical, and plumb. Sounds like three beams, correct? Wrong, in this particular case it’s a single line laser, but it can project in different modes at the switch of a button. It’s simpler to use than one you have to move around to achieve the result, but it’s not a three beam laser.

Another example of a model with three laser modes provides them as level, plumb, and cross. Is these three beams, or four? Nope, this is actually the description of a two-beam line laser and it’s actually a very good, low-cost device, but the description is fairly confusing.

 

Accuracy and range

Accuracy

In general, the more money you invest, the more accurate the line laser you will receive.

Entry level models will typically be accurate to around 1/4″ over 30 feet. That’s really good. If you hung half dozen paintings five feet apart over that distance, we doubt anyone would notice a 1/4″ difference.

But if you were laying tile on a floor or wall, that may not be good enough. The standard for mid-range line lasers is 1/8″ over 30 feet, and for the majority of people that’s as accurate as they’ll ever require.

That’s not to say it can’t be improved or enhanced. During our research we found a number of models that provide greater accuracy, the best of which was 1/16″ over 100 feet. That kind of high precision is only found in rotary lasers, and comes with a fairly high price, too!

Range

When we’re talking about range, we don’t just mean the visibility of the beam. Although we may not be able to see it, devices called laser receivers can increase the range considerably – though not all line lasers are compatible.

Inexpensive lasers are usually only powered by standard AA batteries, so beyond twenty or thirty feet the line will disappear – particularly in a bright room. Outdoors, they become extremely useless.

Mid-range lasers extend to between 60 and 100 feet, depending on the model, but those that feature a pulse mode will work with laser receivers. With a laser receiver, they can go out to approximately 250 feet or more.

Further than that, you’re back in the realm of rotary lasers and the maximum we found for one of those was 2,600 feet and that’s half a mile.

Bright light has a detrimental effect on how visible the laser is, and laser color definitely has an impact. Line lasers come with either a red or green beam, but green lasers are considered easier to see, especially in daylight. Unfortunately, the diodes are definitely more expensive, and they require more power for an equivalent range. Hence, red lasers remain fairly common.

Viewing can be enhanced by the utilization of special laser enhancement glasses and, as they’re inexpensive, it’s worth considering.

 

FOR YOUR SAFETY

Never shine a laser of any kind in someone’s eyes as it’s a tool, not a toy.

 

Additional features

  • If you’ve ever utilized a standard spirit level and tried to judge when the bubble was exactly in the middle, you’ll appreciate the self-leveling option available on some line lasers. You manually put the device within three or four degrees and it does the rest. It makes setting up much more effortless. An override means you can set the level at an angle you may require (when putting in stairs, for example). The mechanism should also be lockable, so it doesn’t get damaged in transit.
  • Many laser levels feature a tripod attachment point. A tripod is a much more convenient and repeatable method of setting up than resting your tool on various objects. A few laser levels include them in the package, but additional costs are usually included. If you already own a tripod, threads are usually common, but check for compatibility anyway.
  • Clamps or magnets on bases are another great idea, enabling you to fix line lasers to ceiling rails, shelves, or anywhere convenient. As with a tripod, having a sturdy anchor-point makes sure of accuracy.
  • Batteries differ and can make a massive difference. It’s common for budget models to have rechargeable AA or AAA versions; some make use of button cells. Larger lasers may utilize the same kind of 12 volt battery pack as a drill driver or other cordless tool. More power almost invariably means better range. If you already have power tools from a particular manufacturer, battery compatibility will save you money on purchasing a spare. Always check, though. Sometimes they may look similar, but are not the same.
  • A case is always a great idea. Line lasers are typically pretty robust, but it’s nice to have extra protection.

 

Self leveling laser level prices

If you just want to line up a few pictures, or ensure a shelf is level, a simple, single line laser will do the job for under $20. Set up is manual, utilizing a built-in bubble like in a traditional level, and then a beam is fired from one or both sides. Easy and effective, every toolbox should have one.

An inexpensive, two line cross laser comes in at around $50, and is good enough for small tiling jobs, aligning cupboards, and similar projects. If you’re a professional, you’ll probably require greater accuracy and range. The best line lasers of this kind will cost you approximately $300. If you require the all-around alignment that a three beam laser line provides, you’ll need to add another $100.

Beyond that you’re into the realm of high-end rotary lasers, and these run from $400 up to several thousand dollars.

 

Tips

  • A line laser is an essential tool that projects a fairly precise guide onto your work surface. Where practical, it’s still a great idea to physically mark the surface in case the laser gets knocked. They’re effortless to align the first time, but can be tricky to re-align to the same position. The longer the distance is, the more exaggerated the difference becomes.
  • If you’re doing a lot of work that needs a 90° angle – maybe building a garden deck, or tiling floors and walls – a laser square is inexpensive and very handy. You may also consider a professional tile laser, created specifically for the task.
  • You should always keep a spare set of batteries handy. You can guarantee the ones in your laser line will run out of power at the least convenient moment.

Line lasers are excellent for giving you a guide to work to, especially over several yards. If you just want to level a cabinet, or a picture hung on your wall, a traditional spirit level is equally precise, and probably swifter. A good toolbox requires both.

 

FAQ

Q. Is the laser in a laser level dangerous to work with?

A. The majority of levels make use of Class 2 or 3 lasers. Class 2 are considered low risk, and only likely to to damaging if looked at under magnification. Class 3 is medium risk, and can cause eye damage if looked at directly. There’s no danger from the projected line, but you should never look directly at the source of the beam, especially if you wear prescription glasses.

Brief, accidental exposure is unlikely to do permanent damage, but can cause momentary “flash blindness,” the same as you may have experience when having your photo taken with a camera flash. That could be severely dangerous if you’re up a ladder, or operating a power tool.

Q. Line laser cases usually have IP ratings, so what are they?

A. IP stands for ingress protection, a standard designed by the International Electro technical Commission. Initially, it defined how great industrial enclosures coped with dust and water. Today, many consumer devices are included as well. The initials IP are followed by two digits and the first is a rating for particles and the second is for liquids.

Full specifications are available online but to give you a rough idea: an IP54 case may enable it in dust, but not enough to stop it working. It would certainly survive water splashes – like five minutes under a garden sprinkler. An IP65 case is entirely sealed against dust, and would survive a good soaking from a hose – but not complete immersion.

Q. If a rotary laser has the greatest range; wouldn’t that be the best selection?

A. Rotary lasers are extremely powerful, and provide the best performance outdoors, but unless you’re building a warehouse, or laying tarmac for a corporate parking lot, they may be overkill. For the vast majority of tradespeople and DIY users, a cross-line laser is more than useful, and even the best are more inexpensive than rotary laser levels.

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *