Byadmin

Nov 11, 2020

Top 8: Best 90 Degree Right Angle Clamp 2021

A 90 Degree Right Angle Clamp is tools utilized in different activities such as holding woodwork and carrying out a wide range of activities. Unlike a hammer and other tools such as pliers, right angle clamps are highly versatile.

You can utilize them to hold large work pieces at a right angle, say while gluing them or screwing them together. The fact that they are available in a variation of designs and styles implies everyone will get something that best suits their requirements.

Since they are a life-saver, right angle clamps are highly produced in the market today. And while this might be a plus to the right angle clamp market, it is a drawback to the consumer who might find it cumbersome getting a premium quality product.

You might think you have a top quality product, only to realize after some time that the product damages easily. To help you prevent this ordeal, we bring you the following Top 8: Best 90 Degree Right Angle Clamp Reviews.

Best Right Angle Clamp Reviews

  1. WETOLS 90 Degree Right Angle Clamp

WETOLS 90 Degree Right Angle Clamp
WETOLS 90 Degree Right Angle Clamp

This is the perfect gift for your family and friends to do DIY at home. WETOLS 90°right angle clamp is uniquely designed with the aluminum alloy die-casting based construction, where high durability and well-built design are conveyed to ensure long-lasting use.

Maximum clamping range is approximately 2.75in/70mm; jaw width: 3.74in/95mm; jaw depth: 1.4in/35mm, allowing two different thicknesses wood block to be connected at the right angle. It can also accommodate most large things including metal tube, steel rod, wood, thick glass, and more.

Wood Clamp’s single-handle jaw can be rotated in two-ways, making clamping more convenient and holding work pieces precisely and accurately. The anti-skid handle is nicely covered with rubber to ensure users’ comfort for hands.

The IRWIN QUICK-GRIP Clamps and the LIUMY 90 Degree Angle Clamp are also perfect for this tool.

Whether for professional utilization or DIY use, WETOLS 90-degree corner clamps are absolutely useful tools to select. The tool is perfect for welding, framing, drilling, doweling, woodworking, making cabinet, installing furniture, box and picture frames, etc.

Pros & Cons

Pros
  • Aluminum alloy die-casting based construction
  • Two different thicknesses wood block can be connected
  • Single-handle jaw can be rotated in two-ways
  • Anti-skid handle
Cons
  • Moves around quite a bit until you tighten it down

 

  1. LIUMY 4PC 90 Degree Angle Clamp


LIUMY 4PC 90 Degree Angle Clamp

LIUMY 90 degree angle clamp features adjustable floating jaw and plated rotating spindle screws, fit for boards with a thickness up to 20mm (0.7874inch). The tightening range of one side can reach 2.4cm (0.944inch), suitable for 90 degree corners or T-joints and can even apply to the assembly of two boards with different thickness and can be good for precise alignment and fixing of workpieces.

This 4 piece angle clamps are ideal for small woodwork maintenance connections, to build wooden boxes, furniture and cabinets, wooden DIY, picture frame reinforcement, etc. LIUMY 90degree angle clamps include 4pcs woodworking clamps, to save your labor time and minimize workload.

It is not only for 90 degree angles, but also for 45 degree saws. The IRWIN QUICK-GRIP Clamps can also be purchased with this tool.

Woodworking clamps sets can be operated with one hand. It enables you to open this clamp with one hand, and the second hand is kept free for the workpiece. It is also great for swift and simple fixing of boards and frames at an angle of 90 degree, screwing or gluing boards together, simple and convenient.

These clamps for woodworking are designed from good quality material, the spring is made of stainless steel and it is durable enough to work many times without damage.

Pros & Cons

Pros
  • 90 degree angle clamp has adjustable floating jaw
  • Can be operated with a single hand
  • Spring is made of stainless steel
  • Suitable for 90 degree corner or T-joints
Cons
  • N/A

 

  1. Can-Do Angle Clamp

Can-Do Angle Clamp
Can-Do Angle Clamp

You can now join picture frames or cabinet frames with the 2-3/4-Inch width frame capacity. The tool features a sliding T-handle for high clamping pressure and moveable jaws. Oblong mounting holes allow for effortless mounting to a workbench and also have a sturdy aluminum construction.

It is featured and recommended in WOOD magazine (12/1994 issue) and the tool is easy to use. It is great for framing, drilling, doweling, and much more and sets up instantly ready to go to work for you.

The IRWIN QUICK-GRIP Clamps and the Swanson Tool Co S0101 7-inch Speed Square Layout Tool is also frequently bought with this tool.

Pros & Cons

Pros
  • Precise Adjustment
  • Clamps on both sides
  • Sliding ‘T’ handle for high clamping pressure
  • Oblong holes for easy mounting on workbench
Cons
  • May not do well at holding two surfaces perfectly perpendicular to each other

 

  1. HORUSDY 90° Quick Right Angle Clamps

HORUSDY 90° Quick Right Angle Clamps
HORUSDY 90° Quick Right Angle Clamps

The clamp’s body part is aluminum alloy die-casting construction which is more durable and stronger but lighter to hold in hand. It features a patent design, quick-release adjustable jaws, single handle and a solid anti-skid strong rubber handle.

The HORUSDY Quick-Jaw Right Angle and the IRWIN QUICK-GRIP Clamps is a great buy with this tool.

The maximum clamping range is 68, which can clamp materials like steel rod, metal tube, wood, thick glass and much more. The floating head and electroplating rotating spindle screw can be adjusted to align and hold work pieces accurately.

This is Unique Tool Gift for Men and is ideal for welding, framing, drilling, doweling, making cabinets, installing furniture, frames and aquariums, etc.

Pros & Cons

Pros
  • Aluminum alloy die-casting construction
  • Quick-Release Adjustable Jaws
  • Solid anti-skid strong rubber handle
  • Floating head and electroplating rotating spindle screw
Cons
  • May only work well for light projects

 

  1. SWMIUSK 90 Degree Right Angle Clamp

SWMIUSK 90 Degree Right Angle Clamp
SWMIUSK 90 Degree Right Angle Clamp

This tool is perfect for boards with a thickness of 5-22mm as it helps hold assemblies like boxes, cabinets, drawers and cases tight-fitting assemblies. It helps with fast and simple fixing of boards and frames at an angle of 90 degree, like assembling shelves, small cupboards or frames.

It features a mounting aid for screwing or gluing boards together and works for corner and T-joints, even with different board thicknesses to make an angle. This is good for single-hand operation so the second hand is kept free for the workpiece.

You can also get the POWERTEC 71017 Quick Release Band Clamp as it works perfectly with the Angle clamp.

Pros & Cons

Pros
  • For boards with a thickness of 5-22mm
  • Fast and simple fixing at an angle of 90 degree
  • Single-hand operation
  • Mounting aid for screwing or gluing boards together
Cons
  • The opening may be fairly small

 

  1. TACKLIFE 2Pcs Single Handle 90° Right Angle Clamp

TACKLIFE 2Pcs Single Handle 90° Right Angle Clamp
TACKLIFE 2Pcs Single Handle 90° Right Angle Clamp

The 90° right angle clamp is designed from high-quality aluminum alloy material with the structural rib design ensures the durability of the tool itself. The die-casting based construction and heat-treated carbon steel threaded rod guarantees longtivity.

The maximum clamping range is 2.75in/70mm; jaw width: 3.75in/95mm; jaw depth: 1.4in/35mm; and allows two wood blocks with different thicknesses to be connected at the right angle.

The Fulton Safety Woodworking Push Block plus Push Stick and the C CASIMR 90 Degree Corner Clamp are also useful when purchasing the Right Angle Clamp. You can also read all qbout the Best Push Blocks for Woodworking in this updated review.

The anti-skid handle is nicely covered with rubber to make sure of comfortability and minimizes your fatigue for a long time working. The swing jaw design can be rotated in two-ways, making clamping more effortless to clamp and holding work pieces, and the oblong holes allow you fix it on the workbench.

Pros & Cons

Pros
  • Heat treated threaded rod and steel nut
  • Made of high-quality aluminum alloy material
  • Anti-skid handle is nicely covered with rubber
  • Swing jaw design can be rotated in two-ways
Cons
  • May experience slippage

 

  1. Housolution Single Handle 90° Aluminum Alloy Corner Clamp

Housolution Single Handle 90° Aluminum Alloy Corner Clamp
Housolution Single Handle 90° Aluminum Alloy Corner Clamp

This is a handy tool that makes your woodworking easy as well as other applications like assembling furniture or cabinets. Whether you are a DIY woodworker or a professional carpenter, the corner clamp is a go-to tool.

Housolution Single Handle 90° Aluminum Alloy Corner Clamp is just the one that you are searching for.

This single handle 90° aluminum alloy corner clamp is an ideal value for home DIYers. It is a good selection for aligning, nailing, woodworking, welding, screwing, making cabinets, box, and picture frames, and can be set up nearly instantaneously.

Designed from abrasion-resistant aluminum die-casting alloy, this clamp can be utilized again and again for years without ever failing while on the job.

It holds angles together with a vise-like grip while creating an unobstructed working area, so you can still accurately weld or assemble joints without the extra hassle of worrying about your clamp.

It also consists of a quick-release mechanism and ergonomic rubberized handle that ensure easy adjustments.

The IRWIN QUICK-GRIP Clamps and the Swanson Tool Co S010 can also come in fairly handy.

Pros & Cons

Pros
  • Made of premium aluminum alloy die-casting material
  • Rubberized single handle with adjustable rotary jaw
  • Solid and anti-skid
  • Can be used as a clamping device for 90° corner joints
Cons
  • Fairly difficult to get it perpendicular

 

  1. GoLucky7 Right Angle Clamp

GoLucky7 Right Angle Clamp
GoLucky7 Right Angle Clamp

This clamp features steel threaded vise screws and two countersunk mounting holes for permanent installation on the bench.It is made from Aluminum Alloy with steel screws and the maximum clamping range is 7cm/ 2.75 inches.

Each right angle clip workers have been thoroughly checked, and had a lead screw tightening test.

There are tons of applications that this clamp can be utilized for, some are but not limited to: crafts and projects, engineering, drilling, framing and picture frame creation, arts, cabinet and cupboard fabrication and even metal framing and welding.

Pros & Cons

Pros
  • Aluminum Alloy with steel screws
  • Holds joints at a 90 degree angle
  • Can also be used for 45 degree sawing
  • Independently adjustable jaws
Cons
  • Not the most durable material

 

What to Consider When Choosing the Best Right Angle Clamp

Joining wood, metal, or any other material at the proper angle can be a tricky process. Both Parallel Clamps and right-angle clamp can make the whole ordeal simpler, but only if you purchase the correct one. To determine which right-angle clamp works well for you, it’s prudent to consider factors like durability, accuracy, and clamping range.

Material

A right angle clamp’s design is the key to its performance. Lightweight clamps are designed from thinner aluminum or even plastic, meaning they’ll work perfectly for light-duty jobs, such as picture frame building, but won’t hold up to clamping together heavier materials for projects like cabinet building or metal welding.

For heavy-duty tasks, search for clamps with reinforced aluminum bodies and steel spindles and arbors.

Accuracy

Accuracy and material type works well together. Durable aluminum alloy and steel clamps won’t warp or bend under pressure, which enables a perfect 90-degree angle.

Single-handle clamps also provide a high degree of accuracy, as they allow you to clamp both pieces simultaneously via a single handle once aligned.

Clamping Range

A right-angle clamp won’t do if it can’t hold the materials you want to clamp together. Ensure to check how wide the clamp’s jaws can open to determine if it provides a wide enough range to hold the materials you need to join.

Most clamps can hold materials up to approximately 60mm (2.36 inches) to 70mm (2.75 inches) wide. All clamps on our list above can join materials of two different widths.

Capacity

The clamp’s capacity integrates both its range, described above, and the jaw’s width and depth. Most clamps feature a jaw width between 3.5 and 4 inches and a jaw depth between 1 and 1.5 inches. A clamp with a wide and deep jaw contains more surface area to clamp the materials you’re joining.

The bigger the jaw’s width, the more stable the clamp can hold longer and heavier materials in place. So while a smaller angle clamp might suffice for a picture frame project, an angle clamp with a longer jaw is required for projects involving larger pieces, such as cabinet-making.

Spindle

The spindle is the long nut attached to the handle that thread through the arbor and into a bolt and the handle turns the spindle, which tightens the clamp. Given that it’s responsible for holding the material in place, it’s the essential component in a right-angle clamp. Most spindles constructed from aluminum.

Heavy-duty clamps consist of heat-treated spindles with steel nuts, which are more robust and thus more durable than standard steel. Heat-treated spindles will not necessarily bend or strip under the pressure of clamping larger materials.

Handle

Given how difficult the process is to align two pieces of wood, metal, or glass into the clamp, the handle is an essential part of a right angle clamp. In most cases, you’ll have to operate the handle with one hand while utilizing the other to steady the two pieces you’re clamping together.

For ease-of-use, most right angle clamps work with a single handle that clamps both parts at the same time. The handle should be big enough to tighten effortlessly with one hand.

Padding

Getting a good grip on the handle as you’re holding everything in place is important. With that in mind, most handles consists of padded non-slip grips that are effortless to hold while tightening the clamp.

Setup

It used to be that right-angle clamps featured multiple handles and jaws that needed more aligning and turning. Innovations in right-angle clamps make setup much more manageable these days. Clamps created with single handles operate one L-shaped jaw that can clamp both pieces at the same time.

These clamps can also pivot on the spindle to accommodate pieces that varies in width. And if that doesn’t provide enough ease, most angle clamps feature holes in the base that enable them to be mounted to a workbench to add more stability for setup.

 

Conclusion

Right angle clamps are extremely versatile; thus, are utilized in numerous work pieces such as doweling, screwing, drawer construction, framing, shelf installation and more. Although there are many in the market, top quality right angle clamps are very few, and that is why we have the above reviews.

Despite having different designs and styles, the highlighted right angle clamps have the same performance and functionality. Ideally, they are highly affordable so you do not have any obstacle getting a premium quality product.

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *